This DIY craft kit is designed to fit perfectly into an 18cm x 18cm box frame from Hobbycraft – here’s the one I used if you want to order the same one.
If you’re using a larger frame, you can simply keep the black outline around the design and mount it in the centre of a larger piece of backing card.
If you’re working with a slightly smaller frame, it can still work with a few tweaks:
- Layers 1, 2, and 4 can be trimmed down.
- The two tables on Layer 3 can be brought closer together (or trimmed a little).
- The four corner pieces on Layer 5 can be added as they are.
It allows for some flexibility — just not too much smaller!
The Jungle Box Frame kit can be ordered as a printed pack or as a digital file from my Etsy shop (coming soon).

Step 1: Colouring the design
Start by colouring in all the images within the black square on each sheet. You’ll also notice some extra illustrations at the top of each page — these are optional. You can:
- Colour and cut them out to add more layers to your final piece.
- Use them for testing out different colour palettes and materials
- Save them for other plant-themed projects

Step 2: Cutting out
Once coloured, it’s time to cut! Each layer is printed with a bold black outline to follow – use a sharp pair of scissors or craft knife.
- Layer 1 (Back): Cut out the entire black square. Test it against the backing board of your frame — trim if needed so it sits flush.
- Layer 2: Cut away the top half, keeping the bottom half with the thick black line attached.
- Layer 3: Cut out the two tables and keep the black lines on the edges. The ends of the table legs are not seen in the final layout so you can choose to cut from the black frame and help with the positioning when glueing the layers
- Layer 4: Cut around the top of the flowers, keeping the black frame along the bottom edge.
- Layer 5: Cut out the four corners as separate pieces, keeping the black edge around each one.
Once you’ve done the basic cuts, stack up the layers and decide if you want to add any extras. You can do whole plants or pick out certain leaves or flowers.

Step 3: Assembling in the Layers
Once you have layers 2,3 and 4 trimmed to size, you can start adding the foam tape. It can be done with foam pads but it’s quicker and easier with tape.
For a more dramatic effect, I have added tow layers of foam between each layer. I recommend keeping the wooden square in place while you’re adding the layers to make sure it fits.
As you build up the layers, consider how high each layer needs to be and raise each section as needed. For example, the Laceleaf plant in the stripy pot is on layer 3 but will be stuck down to layer 1 so needs to be built up on 4 layers of foam (2 x2 for each layer)
Once you’ve added Layers 2, 3 and 4, you can decorate further with any additional coloured elements you prepared.

Step 4: Adding the Corners & Finishing Touches
If you’re using a different frame, you might want to glue the four corners from Layer 5 on top as part of the layered design.
But for the Hobbycraft frame I used, I actually placed them behind the glass, stuck to the white mount included with the frame. A tiny bit of blu tack holds them in place beautifully.
Now all that’s left is to reassemble your frame and admire your leafy masterpiece. Mine’s gone straight on the wall in our downstairs loo — and I absolutely love it!

Home Jungle Box Frame kit – how to order yours!
If this idea has inspired you or maybe you have a different project in mind. You have a couple of options to order these papers.
You can either order a set of Printed Papers – these are printed on silky smooth (160gsm) white paper. At this weight, it’s either classed as thin card or very thick paper. Either way, it’s a great thickness for cutting and mounting. These will be sent to you in a flat A4 box, wrapped and secure so they arrive to you in perfect condition.
Alternatively you can order the digital files for these images – they are 300dpi PDF files to print on A4 or US Letter size. You can use the files for digital projects or print unlimited copies on your home printer.

Free digital papers every month
Every month, I design a new set of patterned papers and they are included in my DbyD Club Newsletter as a free download. This freebie is sent out on the first Friday of each month, to find out what the next set of papers will be follow me on Facebook for updates.
Alternatively, you can join the DbyD Club by clicking this button and adding your email address. It’s free to join and you’ll receive 2 craft-filled emails each month and news of events coming up – I promise there’s no spamming!