Don’t get stuck – I’m here to help!


Which glue should I use?

One of my memories from primary school was learning how to ‘glue’. Whenever we completed an art project we had to mount our work onto some sugar paper with the good old PVA glue. Each year, our new class teacher would have a different preferred method of gluing, one was a dab in each corner, one was around the edges, another was also around the edges but with a big cross through the middle. There was even a year when we covered the whole back – that was messy! But this is not how I experienced it – little, naïve 8 year old me thought we were being taught the best way to glue each time – much the same as how we were taught addition, then times tables and then fractions. I assumed each year I was being taught a more advanced method of gluing! I got a bit suspicious when one year we reverted back to an ‘old’ style of gluing. I still don’t know the best way to glue with PVA, I just know it’s best to avoid it in most grown-up craft projects.

The glues I use now cover me for every sticky dilemma – from fiddly buttons to coils of wire, I’m determined that everything will stay in it’s proper place!

Here’s my collection:

  1. Glossy accents (not actually a glue but does a great impression)
  2. Double sided tape
  3. Glue pen
  4. Glue mouse
  5. Foam pads (a. Roll b. Large squares c. Small squares)

How do you know what the best glue to use is?

This depends on two key factors – What you’re trying glue and how will the finished project be used?

So if you creating a handmade card, it is likely to only be ‘used’ for a few weeks but during this time it might have to fly half way around the world to survive a night in your handbag to you friend’s 37th Birthday cocktails. I know which one would survive better… Once it’s been received it might then sit on a sunny windowsill, in a busy kitchen, or hung on a string. Each environment will take a toll on the glue you use – It only has to last a short time but will it survive?

Now, if it’s a scrapbook page you’re making, you want it be around for years or decades but it’s going to have a lovely protected life in its plastic sleeve in an album. You also want your photos to be around for years so be sure to use acid-free glues – most craft glues are labelled as such. Here’s a useful article about why.

I have completed a handful of scrapbooks now (although my wedding and honeymoon ones are still unfinished even after 8 years of marriage!) and I don’t really know how well they will last, especially my early pages when I didn’t really know what I was doing. I have visions of my future grand-daughter or great grand-daughter unpacking my scrapbook to salvage and re-stick what she can.

Anyway back to the here and now – what are you trying to stick? Here are my top tips for these commonly used craft items…

Easy things to stick

Paper – The main thing to avoid is wet glue, let’s leave the crinkled papers to the pre-schoolers and the 8 year old me. I like to use my glue mouse (adhesive glue roller) to stick most papers. It adds a thin, flat layer of tape to the paper. If the paper is thin, make sure you get close to the corners as these might roll up if not properly held down. It can often feel easier (and cheaper) to reach for the glue stick, which will stick your paper but beware of these 3 common mistakes:

  1. Buckling or creasing the paper while trying to ‘glide’ a stubborn glue stick onto your paper
  2. Little lumps of glue that will show through as bumps on your final project. Check for them and remove them with a cocktail stick or fingernail before you stick it down.
  3. Getting messy! I generally end up with sticky fingers and a sticky work surface when using a glue stick and it can leave nasty black smudge marks on your work. If you’re gluing lots of pieces, use some scrap paper or an old magazine to lean on when you’re adding the glue and if you go over the edges, move to a clean bit of scrap/magazine to glue the next piece.

Card – so much more forgiving, you can pretty much glue with anything and not leave a mark! However, for a card you want it to last! I’ve been given many cards that have a beautiful design and are stuck to a piece of backing card that’s stuck to the card. Like this one for example, one of mine but you get the idea:

If the glue holding the backing card isn’t strong enough, the weight of everything else will cause it to fall off while on display. So I like to opt for my glue mouse around the edges and then add some double sided tape to the middle – this is effective when the card surface is smooth. If the card is textured, you’ll need to add some wet glue too – something like the Glossy accents above. You can still use the glue mouse around the edges and only use the wet glue in the middle – this will avoid the risk of glue seeping out of the edges.

Difficult things to stick

Buttons – Do you have the time (& the inclination) to sew them on? If you do, use 3 or 4 strands of embroidery thread (contrasting or matching colour)– you’ll be so pleased with the results, it looks great. No time to spare, then a strong, wet glue is best to hold them in place. I prefer to use glossy accents, add a small amount to the back of the button. Be gentle when you press the button down, as it can slide and the glue will spread and look messy. It will also take a few minutes to set so be careful not to knock it.

If you are sewing them on, it’s a good idea to add a little bit of glue (Glossy Accents) to hold the buttons in place while sewing – avoid getting glue into the hole of the buttons. To make it easier to sew, you can place you project on a foam mat and pierce through the holes of the buttons with a pokey tool or large needle first.

Ribbons – They’re so beautiful, but can be so messy – fraying ends, glue soaking through or buckling. Think about the design and layout of your card – can you hid the ends of the ribbon? That way you can secure the ends with sellotape or a strong wet glue like Glossy Accents. If the ends are showing – cut them into snake tongues – test it on a spare piece of ribbon first to make sure cutting the ribbon doesn’t make it fray. If you do need to glue the length of the ribbon, it’s best to use a strip of double sided tape behind the ribbon – the full length, not in patches. For this to look smart, the ribbon will need to be thick and strong as it can pukka or the glue can show through.

Brads – the backs of brads are so unsightly, especially when they come through to the inside of the card. So use layering on your card so you have somewhere to hide the back of the brad. There’s still an issue with them as they don’t sit flat! Using a foam pad will absorb the uneven surface of the brad and still stick firmly onto your card.

Wire – I’ve love including wirework in my papercrafts, I think it looks beautiful but it’s not easy to keep under control! Here are a couple of specific solutions I’ve found but feel there must be more designs I can create that seamlessly include beautifully curled wires.

  1. Butterfly antennae – use one piece of wire (using two separate wires will be very difficult to hold in place) and curl each end, then fold it back on itself so that the curls turn outwards. Use a thin strip of double sided tape and thread this through the middle of the wire, stick it to the back of your butterfly – this will only stick one antennae down but it stops the slipping out completely. Remove the backing (can be tricky as its tucked under the wire, so peel back both ends) and add a second piece of double sided tape over the top of the first. Depending on how thick your wire is, you might have the same problem as the brads, in that it’s too bulky to lie flat and stick properly. If this is the case, add a foam pad strip to stick it to your card or scrapbook page. If your butterfly is big enough, only use glue near the centre line. Let her fly, don’t weight down her wings!
  2. Sew on with a few strategic stitches, consider how much movement the wire will have, assuming you’ll want no movement then you’ll need to add a stitch to the curls at the ends of the wire. This method is great if you’re adding beads to the wire as it keeps them evenly spaced. Remember to add the beads BEFORE you curl the ends of the wire!

Fine Die cuts (& lettering) – This is when you really need precision gluing! I use my glue pen for this task, it’s a fine as a ballpoint pen and easy to apply. It takes a little time to work efficiently so once you’ve ‘drawn’ your glue on, leave it 30 – 60 seconds before sticking it down. I generally start gluing my letters in sequence, so I’ll add glue to H, A, P, P then stick down H, glue Y, stick down A, glue B, stick down P, glue I, ….. The only downside to this glue is that it’s not very strong, so you’re likely to see a sad ‘Happy Bi thd y’ card on someone’s window sill! Not a good look! To avoid this, I try to add a few small dots of a stronger glue, like Glossy Accents to larger bits of the letters or design. Quite often, the swirly, decorative letters have bigger spots or sections so this is quite easy to add the glue to.

Is that everything stuck down? I hope so! I hope you’ve found that useful and maybe picked up some new ideas to try. If there’s anything else you like me to cover or how about a video demo of the ideas I’ve mentioned here then please get in touch! Comment below or drop me an email to della@dellabydesign.co.uk

Leave a comment

Your email address will not be published. Required fields are marked *