Rustic Robins Card Ideas


Let’s make this cheerful selection of robin themed cards – I’ll explain how each one is made. They are perfect for quick and easy Christmas cards to make for family and friends.

The paper pack includes 5 sheets of coordinating patterned paper. One Greetings sheet with plenty of embellishments to use and 4 background patterns. I have opted to print them onto thin cream cardstock, which pairs beautifully with the recycled Kraft card blanks.

Here are 3 cards to make from the Rustic Robins Paper pack, which can be ordered as a printed pack or as a digital file from my Etsy shop.

Card 1: Robin Trio (6x6inch square Kraft card)

Let’s start by bubble cutting around each of the three robins – leaving a thin edge around the image. Add foam pads to the back of each one and set aside.

Next, cut 3 red rectangles – for this 6×6 inch card, I opted for two 5 x 1.5 inch rectangles and one 5.5 x 2 inch. I’ve curved each corner using a paper punch, but this can be done with scissors or left as straight corners.

TOP TIP: If cutting the corners with scissors, start by cutting one and then use it as a template for the other rectangles. This will help keep them all the same depth.

Cut the ‘Happy Christmas’ from the greetings sheet with the dark green border and add foam pads to the back. Cut out the 3 colourful squares panels.

Arrange all the pieces onto the front of the card blank – I’ve aimed for the same gap between the red rectangles and the sides of the card blank. Once you’re happy with the layout, glue the rectangles and colourful panels down and peel off the backing to stick the embellishments on top.

Card Design 2: Spotty Greetings (5x5inch square Kraft card)

Cut out the diamond covered square from the greetings sheet, aim to cut on the outside of the red edge. Cut a 4.5 inch square from the spotty paper. Cut out the red ‘Happy Christmas’ greeting and add foam pads to the back. Arrange these 3 pieces to the front of the card black and stick down.

Cut out one of the waving robins from the greetings sheet. I’ve then used the second one (they exactly the same) to cut out the Santa had and red belly. Curve all 3 pieces on a wooden spoon handle so the curve runs from left to right (not up and down). Add a thin strip of foam pads to the centre line of the hat and belly. Attach to the main robin, curve again and then add foam pads along the centre line.

Glue the robin onto the front of the card by peeling of the backing. I also added some strong, wet glue to the wings and held them in place while the glue dries. This enhances the 3D curve on the robin.

Card Design 3: Festive Rainbow (6x6inch square Kraft card)

This design will take you a little longer to create but it looks stunning when finished. The greeting sheet includes a cutting guide so you don’t need to find the perfectly sized dinner plate to draw round.

Let’s start by cutting a 5.5 inch square from the green diamond paper and glue this to the inside of the card, right hand side. Cut out the ‘rainbow’ from the greeting sheet, including the black lines on either side. Use this as a template to draw the curve on the front of the card. Then draw the same curve onto the cream card, this can be roughly cut out 1/2 inch within the line as the edge will be covered up by the rainbow.

Once you’ve drawn the lines you need, cut the black lines off of the rainbow, cutting along the green and red lines. Cut away the curved section on the front of the card blank. When you lay the rainbow on the front, it should create a neat border on the curved edge. The ends of the rainbow may overhang the edges of the card but we’ll deal with that later.

Cut a 1 1/2 inch strip of the square patterned paper and trim it to fit behind the rainbow. Once all the pieces are ready, glue them into place on the card in this order: cream card, squared paper, rainbow. I got the order wrong on my first attempt! Trim off the rainbow if needed.

Next, let’s bubble cut the holly leaves leaving a thin border around the image. Cut out the large robin from the greeting sheet and add the hat and belly in the same as Card Design 2 above. Cut out the ‘Happy Christmas’ greeting, I liked making this small enough to fit within the square pattern behind.

Glue the greeting and holly leaves onto the card, being careful to not add any glue to the part of the leaf overlapping the edge. Peel the backing off the foam pads and add the robin in prime position.

To finish, I added a cream panel to the inside of the card to write the message.

Rustic Robins paper – how to order yours!

If these designs have inspired you or maybe you have a different project in mind. You have a couple of options to order these papers.

You can either order a set of Printed Papers – these are printed on silky smooth (160gsm) cream paper. At this weight, it’s either classed as thin card or very thick paper. Either way, it’s a great thickness for cutting and mounting. These will be sent to you in a flat A4 box, wrapped and secure so they arrive to you in perfect condition.

Alternatively you can order the digital files for these images – they are 300dpi PDF files to print on A4 or US Letter size. You can use the files for digital projects or print unlimited copies on your home printer.

Join the DbyD Club

You can join the DbyD Club by clicking this button and adding your email address. It’s free to join and you’ll receive 2 craft-filled emails each month and news of events coming up – I promise there’s no spamming!

Leave a comment

Your email address will not be published. Required fields are marked *