Let’s make this gorgeous selection of cheeky Christmas cards – I’ll explain how each one is made. They are perfect for sending to friends and family this Christmas.
The paper pack includes 5 sheets of coordinating patterned paper, printed on thin white card. One Greetings sheet with plenty of embellishments to use and 4 background patterns.
Here are 3 cards to make from the Christmas Pudding Paper pack, which can be ordered as a printed pack or as a digital file from my Etsy shop. With the digital file, you can choose to print them at home to make these cards with the simple instructions below.

Card 1: The Pudding Gang (6x6inch square white card)
A quick and easy card to start us off. Cut out the largest Christmas pudding on the greeting sheet, the matching icing topper and two other puddings. Cut away the red and green frame from the greeting sheet and trim into a square.
Cut a 5 1/2 by 5 1/2 inch square from some black card and a 5 1/4 by 5 1/4 inch square from the stripy paper. Use the smallest ‘Merry Christmas’ from the greetings sheet and cut a mount for it from some red card.
Add some red ink to the edges of the patterned squares and greeting using a sponge. Glue the black card and two patterned squares onto the centre of the white card blank. Glue the ‘Merry Christmas’ greeting onto the red mount and add foam pads to the back.
Add foam pads to the back of the icing and attach to the pudding. Then add foam pads to the back of the pudding too.
Arrange the three puddings and the greeting onto the card. Once you’re happy with the layout, glue the two smaller puddings directly onto the card and peel off the backing for the final pudding and greeting.

Card Design 2: Christmas Ribbons (6x6inch square white card)
This was fun card to make and you can use this ribbon idea to use with other patterned paper scraps. Start by cutting strips of patterned papers – I’ve used 3 of the papers in this set. Cut a range of widths, mine are 3/4 inch to 1 1/2 inches.
You can cut the ribbon ends by hand or create a template to draw guidelines to help. To make a template, cut a strip of scrap paper, 2 inches wide and fold in half length ways. Cut at a diagonal from the centre fold to the edge. Open and lay over the paper strips, aiming to the match to centre point on the template to the mid-point on the paper.
Add red ink to the ‘ribbon’ edges using a sponge and start experimenting with the layout. You can adjust the height of them and which ones overlap. Once you’re happy with the layout, take a quick photo of the card for reference.
Start gluing the ‘ribbons’ to the card blank, letting the tops over hang the edge. Once they’re all stuck down and the glue is dry, trim off the excess card with a sharp pair of scissors.
From the greetings sheet, cut out the smallest pudding and the green ‘Merry Christmas!’ Cut a black mount for the greeting and glue to the card. Add a foam pad to the back of the pudding and add to the card.
As a finishing touch, add some faux stitching with a black fine liner around the edge of the card.

Card Design 3: Dancing Puddings Box Card (A4 sheet of red card)
This is so much fun to make but it will take a little longer. It’s made with a sheet of A4 card (21cm by 29.7cm) to form the box, which will fit in a 6 x 6 inch envelope. My video demonstration on YouTube shows how to make this box card.
Once you have your box card, you’re ready to decorate it! I’ve added 4 squares from the tartan style paper and stuck them around the base of the box – I kept them in order so the designs continues around the corners. I covered the 3 top panels with squares of green card (2 1/2 inches) Plus a red square (2 1/4 inch) to the ones on the sides. For the back panel, I’ve used a rectangle of green card and strip from the tartan card.
Next, we can cut out various puddings, the circle greeting and the holly leaves from the greeting sheet. Add foam pads to the back of the holly leaves and attach them to the side panels.
To add the puddings, you’ll need strips of acetate – this can be purchased as sheets of A4 or you a keep a look out for packaging you could cut up and reuse. Use strong double sided tape or foam pads to attach the puddings to the end of the acetate. Slot them into the pocket you made on the box card. Make sure that you can still fold the box and the bees are hidden inside – this means it can fit into the envelope. Trim down the acetate if they’re too long.
Finish you card by adding the ‘Happy Christmas’ greeting to the front section of the box. Isn’t it fab? A proper showstopper of a card!

Christmas Puddings – how to order yours!
If these designs have inspired you or maybe you have a different project in mind. You have a couple of options to order these papers.
You can either order a set of Printed Papers – these are printed on silky smooth (160gsm) white paper. At this weight, it’s either classed as thin card or very thick paper. Either way, it’s a great thickness for cutting and mounting. These will be sent to you in a flat A4 box, wrapped and secure so they arrive to you in perfect condition.
Alternatively you can order the digital files for these images – they are 300dpi PDF files to print on A4 or US Letter size. You can use the files for digital projects or print unlimited copies on your home printer.

Free digital papers every month
Every month, I design a new set of patterned papers and they are included in my DbyD Club Newsletter as a free download. This freebie is sent out on the first Friday of each month, to find out what the next set of papers will be follow me on Facebook for updates.
Alternatively, you can join the DbyD Club by clicking this button and adding your email address. It’s free to join and you’ll receive two craft-filled emails each month and news of events coming up – I promise there’s no spamming!