![]()
To make the white snowflakes on my Christmas cards this year I have used a clear ink and white embossing powder. Once the snowflake is stamped onto the card, I quickly (as it needs to be wet) sprinkle on the embossing powder. Using my heat gun (basically a small, angry hairdryer) I heat the powder until it melts and sets into a glistening snowflake. All seems so simple? Well, there are a few mishaps that happen along the way- here are my tips on how to avoid them!
Common mishaps when embossing
1. The card you’re using has glue on it or is wet and extra embossing powder sticks to it. Before you heat the powder you can remove it, can be tricky depending on how close it is the image you want to emboss. Using a dry paintbrush works well.
2. Knocking or smudging the powder – this is generally game over so you’re probably best to brush off all the powder in the bin, wait for the card to dry and start over.
3. Card is too small to hold! If you’re like me and like to be economical with every scrap of cardstock this can happen….a lot! The heat gun is HOT so you need to be able to have enough room to hold the card comfortably. Always angle the heat gun upwards and away from your hand. For delicate work you can use a pair of tweezers to hold the card but make sure it’s not too heavy that you drop it! Eek!
4. Missing some of the powder and not heating it. This is my most common mistake, it does take practice and concentration to see when the powder turns from, well, powder into the molten image. The metallic powders are quite obvious but the clear or white powder are more tricky. They look like they’re not doing anything for ages and then quick as flash they change, but if you missed it change you can really doubt yourself if it even happened!
5. Smudging it when it’s still hot! So while I’m doubting myself as to whether no. 4 has happened, I switch off the heat gun and run my finger over it just to see…..don’t do this!!! It doesn’t burn but there’s lots of heartache as my beautiful snowflake is smeared across the page.
I hope that helps you guys, let me know any other useful tips you can at della@dellabydesign.co.uk and send me some pics of your embossing endeavours.