How to Stamp Perfectly 3


Oh no, I’ve ruined this card with that stupid stamp!

A handmade card ruined by a badly stamped 'happy birthday', how to get better at stamping

We’ve all had this misery – a beautiful card, finished and ready to send. But does it need a ‘Happy Birthday’ on it? Ok, yes, you quickly stamp it on the corner of the card. In the rush, you stamp it wonky, or it smudges or it’s missing the ‘Hap’ or it’s upside down!

I feel your pain. It’s tough to fix once the damage has been done and starting again can really feel like a chore. Wasn’t crafting meant to be fun and enjoyable? Maybe stamping just isn’t for you. I’ve heard this a lot at craft fairs and workshops, it makes me sad. I hope this handy guide will help you get your confidence back and open up a world of stamping opportunities for you.

I’ve stamped it wrong!

What kind of stamps are you using? If you have a still have a stack of wooden block stamps then I’m sorry, but it’s time to move on. Full disclosure – I still have a tower of them but I haven’t used them since……er, well I don’t remember! Shall we pledge together to get rid of them? Pass them on to some creative children or a charity shop.

A tower of old wooden stamps, clear stamps have replaced rubber stamps

The crafting world created ‘Clear Stamps’ and it hasn’t looked back. These stamps are thin, clear and you can see the image you’re stamping as you’re stamping it. That’s a great confidence-booster when you’re stamping.

If you’re still hesitant (which can give you an unwelcome wobbly hand) then adapt your design so that you’re stamping on a separate piece of card. When you have the perfect stamped image, cut it out – a fussy cut or neatly trim it with a guillotine and stick onto your card. Nearly all my cardmaking kits have this in common – can you spot the stamped extras?

Selection of handmade cards, beautiful cards to make yourself, cardmaking ideas, Della by Design

There’s a bit missing every time I stamp it

Every stamp is different, especially large stamps – they can take on a life of their own! When you’re stamping, keep a bit of scrap paper to hand and stamp on there first. Notice how good or bad the image looks? Is there a patch in the middle that too light or you’re missing the edge on the left? Once you have that in mind, stamp again and apply extra pressure on those problem areas. Stand up if you need to give it some force. Alternatively, this is when a stamping platform comes in handy. The platform allows you to re-ink and stamp again in exactly the same spot – and I mean EXACTLY!

large ornate stamp with section missing, the problems with stamping, how to stamp perfectly

Whatever I do, the image is still patchy

This may well be the fault of the stamp. It’s harsh but true that not all clear stamps are created equal. Even though they’re all called ‘Clear Stamps’ I strongly advise finding ones that are ‘photopolymer’. Companies are getting better at displaying this on the packaging – some good brands to try are Inky Doodles, Woodware & Card-io. I think I can safely say that all the free stamp sets on magazines are not photopolymer.

If like me, you’ve thrown away all the packaging and don’t know which stamps you have  – you can sniff them to check! Believe it or not, the photopolymer stamps give off a strong, somewhat unpleasant smell! So if you ever catch me sniffing my craft supplies you’ll know I’m not crazy(ish).

I blurred the edge of the stamp

This often happens when stamps are ‘rocked’ – the pressure applied rocks the block and the stamp side to side (or front to back). The best way to avoid this type of movement is to use a block that is only slightly larger than your stamp. I have a range of block sizes and it’s a good idea to have them all to hand as it’s very tempting to grab the nearest when you’re in a crafting frenzy!

stack of clear acrylic blocks for clear stamps, how to use clear stamps, common stamping mistakes

The ink wasn’t dry and I’ve smudged it

You stamped the perfect ‘Happy Birthday’, pick up the card and smear the ink with your thumb…..how annoying?! You’ll find that most inks will dry very quickly – by the time you’ve cleaned the stamp and put it back on its acetate sheet. However, if your paper or card is pearlised or glossy then you may struggle. If you’re unsure about the paper you’re using – test out a stamp on a scrap piece (this is when I usually dive head first into the bin to find that bit I just threw away) – does it smudge? Do you need to leave it dry for longer or will it just not dry? If it’s the latter, then you do have some options. You can use an ‘Archival Ink’ pad instead – this is basically the Sharpie of ink-pads. It can even cling to clear acetate or mirror card, but be gentle, appying pressure to the stamp is like ice-skating! If you don’t have this ink, you could also consider heat embossing the image.

flower stamped on acetate, when to use Archival Ink, how to keep stamp ink from smearing

My clear stamps won’t stick to the blocks anymore

Now, a well loved stamp will lose its sticky-ness – especially if you’ve used them for heat embossing or have glitter on your craft mat regularly. They can be improved with a good wash.  Gently wash them in warm mildly-soapy water, rinse and shake off the excess water. Leave them to air dry (both sides) as any tissues or cloths could leave lint on the stamps. Don’t forget to wash the blocks as well.

There’s something weird on the stamped image

Start by inspecting the stamp, is there any fluff stuck on the stamp? Use some tweezers to remove it, especially if it’s soaked in ink! If you can’t see anything then it may be a manufacturing error – you got a little more stamp than you paid for. This quite often happens around the edge of rubber stamps – remember that rocking motion I talked about earlier? Well if the surround of the image is too big, you’ll get annoying lines around your image. You can use a sharp knife to cut away the extra rubber, just be careful not to disturb the image.

A little black dress stamped with a rubber stamp, edge cut away from rubber, how to fix bad stamps

I’ve got ink marks on back of the card

Crafting in a whirlwind of creative chaos is certainly a fun way to spend an afternoon but you have to keep it clean! Keep a pack of wet wipes handy (did you know you can now get biodegradable ones?) and wipe clean your stamps and craft mat. Be especially careful if you’re stamping over the edge of the card – a glass craft mat will need wiping straight away!

Flower stamped on corner of card and made a mess on glass craft mat, avoid common stamping mistakes, how to not get messy when stamping

Ready to get started?

Have you encountered some of these problems? I hope you’re now feeling more confident to get those stamps out and have another go. Remember, most mistakes can be covered up by a well-placed butterfly! Plus, you now know how to avoid the most common mistakes in the first place.

Let me know how you get on in the comments below. Happy crafting!

Selection of stamping examples, put these mistakes behind you and stamp perfectly, stamping for dummies, della by design blog

=


Leave a comment

Your email address will not be published. Required fields are marked *

3 thoughts on “How to Stamp Perfectly”

  • Lisa

    What an interesting read. I can certainly relate to a lot of this. I have an array of wooden stamps but an even bigger collection of clear stamps. I struggle with ink and getting the right ones tbh. However, i also need to get myself some time to create my cards again as i do love making them

    • della_by_design Post author

      Hi Lisa, Thank you, yes I’ve encounted all of these problems in the past. Once you’ve found a brand of ink that you like using and works well then I’d stick with it. The ink’s packaging is not often very clear about what they’re suited for. I hope you make time for some cardmaking soon, any April or May birthdays you need a card for?